Second Test Flight Report
Avionics report As we are the brains of the rocket we have some tasks we want to achieve at the end of each launch: - Log flight data - Transmit flight data - Check for apogee - Fire parachute - Build the flight computer 1. Log flight data We were not able to equip the rocket with an SD card is it was throwing some errors just before flight. We had tested it and it worked previously. So we didn't want to take more time debugging the problem as we had a backup for that. If we could be able to transmit the data well and good. As we would be able to log the data on the ground station. Recommendations - Test the SD card and make sure it is working prior to launch - Figure out a way to write to the internal flash system of the rocket 2. Transmit flight data We were able to transmit flight data from the rocket to the ground station. We used the Lora module and we were able to send a packet back to the base station Recommendations - Beef up the base station as to not rely on Putty and bor